Black plastic profile | Power input/output GST18

STEP BASE

906.11930

4

45°

362 x 52 x 44 mm

STEP BASE

906.11931

2

45°

232 x 52 x 44 mm

STEP BASE + 1 switch

906.11932

4

45°

405 x 52 x 44 mm

Anodised aluminium profile | Power input/output GST18

STEP ALU

906.10932

35°

A&C 22W

145 x 52 x 44 mm

STEP ALU automatic switch-off device

906.18823

Energy-efficient
1 x automatic switch-off device with socket
1 x button connection with 0.5 m cable and plug connector for linking to module 917.060

STEP ALU MCB

906.305

Circuit-breaker 16 A, 2-pole
Characteristic B

STEP ALU overvoltage protection

906.2060

Overvoltage protection 2 kV with function and fail indicator

STEP ALU overvoltage protection

906.18810

Mains and frequency filter
Width: Approx. 220 mm
Overvoltage protection 2 kV with function and fail indicator
Mains and frequency filter, 30 MHz

STEP ALU RCD

906.18812

25 A residual-current device
Response current 30 mA
Response time 30 ms
2-pole

STEP ALU RCD

906.307

Residual-current device
Response current 30 mA
Response time 30 ms
2-pole
Circuit breaker, 16 A nominal current
Characteristic B; 6 kA

Mirror tape, double-sided

918.123

Double-sided adhesive mirror tape
Dimensions 200 x 30 x 3 mm

Mounting accessories

375.502

4 x screws, 2.9 x 30 mm
2 x end cap cover strips to provide a visual finish (fitted on the end caps where two power strips are linked together)
1 x connection cover
1 x end cap for power output socket

Mounting bracket stainless steel straight

940.097

For insertion into the rear of a STEP profile
For screw fixing e.g. under a desk or table
Packaging unit: 2 units

Stainless steel mounting bracket

940.096

Mounting brackets left and right

Stainless steel mounting bracket with elongated hole

940.024

For insertion into the rear of a STEP profile
With elongated hole (keyhole) for screwing into place, ideal for use with power strips with data connections
Packaging unit: 1 x left, 1 x right

Steel sheet mounting plate

940.108

For insertion into rear of STEP profile
The power strip is fixed by screwing the nut onto the threaded screw
1 mounting plate including M5 screw, washer and nut

STEP cover strip

375.529

For fitting over the end caps of STEP power strips
Visual finish
Black plastic
Packaging unit: 2 units

STEP plastic mounting clip

918.025

For attaching STEP BASE and STEP ALU power strips
In suitable cut-outs in sheet steel (thickness 2.0 mm)
2 x plastic mounting clips
4 x screws, 2.9 x 30 mm